Direct factory supply of precision-coated, high-reliability tapes meeting strict international engineering tolerances.
How advanced carbon-chain acrylic gel chemistry and dust-free precision coating redefine non-destructive structural bonding for global OEM supply chains.
Unlike conventional pressure-sensitive adhesives that rely on low-molecular-weight tackifiers that degrade and leave gummy residues, our wholesale Nano Glue Tape utilizes a carrier-free, solid-phase acrylic gel elastomer. Its molecular architecture incorporates synthetic micro-suction structures mimicking gecko-setae adhesion.
This enables instantaneous wet-out over micro-rough surfaces via intermolecular van der Waals forces, creating high holding shear without permanent chemical cross-linking with the substrate.
Founded in 2007, Zhuhai Huayuan Electronics Co., Ltd. has evolved into a nationally recognized High-Tech Enterprise and Guangdong Specialized SME. Operating out of Nanping Science & Technology Park in Zhuhai and our expanded Tanzhou production base in Zhongshan, we control the entire value chain.
Our facilities house Class 10,000 cleanroom extrusion lines, multi-head solvent-free co-extruders, and automated high-speed slitters supported by our Hong Kong international entity for frictionless global logistics.
The defining procurement advantage for high-volume converters is repeatable peel cohesion. When stretched at a 45-degree angle, the acrylic polymer chains undergo reversible strain-hardening, cleanly separating from glass, brushed aluminum, ABS, and polycarbonate.
Furthermore, surface particulates can be rinsed away with deionized or tap water; as the hydrophilic surface moisture evaporates, the unblocked acrylic micro-voids naturally restore 98%+ of original tackiness.
Engineered non-permanent fastener replacements serving cleanroom electronics, commercial architecture, and green automotive sectors.
In mobile device assembly, automated test fixtures (ATE), and smart appliance displays, mechanical fasteners consume critical PCB surface area and introduce localized stress concentrations.
Custom die-cut nano tape gaskets offer instantaneous fixation, vibration dampening, and acoustic isolation, allowing rapid disassembly during quality control rework without part damage.
Electric vehicle (EV) architectures demand ultra-low VOC interiors to comply with GB/T 27630 and VDA 278 standards. Our high-caliper (1.0mm - 2.0mm) nano acrylic tapes bond sensor brackets, HUD dash components, and ambient lighting rails.
The isotropic foam structure absorbs thermal expansion mismatches between polycarbonate fascias and aluminum structural sub-frames.
Modern commercial interior fit-outs and fast-paced retail POS fixtures require high-transparency bonding that leaves zero ghosting on glass partition systems, marble, or acoustic acoustic panels.
Huayuan nano gel tapes maintain 99.2% optical clarity, do not yellow under commercial indoor UV exposure, and support load capacities up to 1kg per 50mm² under ambient conditions.
Semiconductor packaging, medical sensor calibration, and optical assembly cleanrooms cannot tolerate silicone off-gassing, particulate shed, or plasticizer migration.
Our cleanroom-packaged nano tape rolls, provided on fluorosilicone-coated or PET release film liners, deliver non-contaminating, static-dissipative temporary mounting of jig components and calibration tags.
Rigorous mechanical testing according to ASTM D3330 (Peel), PSTC-107 (Shear), and UL 746C environmental protocols.
| Performance Characteristic | Test Standard | Standard Nano Gel (Retail Grade) | Huayuan Industrial Nano Tape (Pro) | Procurement Advantage |
|---|---|---|---|---|
| Caliper / Thickness Range | ASTM D3652 | 1.0mm - 2.0mm (±15% variance) | 0.5mm, 1.0mm, 1.5mm, 2.0mm, 3.0mm (±0.03mm) | Precision fit for die-cut electronic enclosures |
| 180° Peel Adhesion (Stainless Steel) | ASTM D3330 | 12 - 16 N/25mm | 22 - 30 N/25mm (Formulation Dependent) | High dynamic hold without substrate lift-off |
| Static Shear Holding Power (1kg @ 23°C) | PSTC-107 | < 24 Hours | > 168 Hours (Zero Creep Displacement) | Long-term safety factor for vertical installations |
| Tensile Strength & Elongation | ASTM D3759 | 180% Elongation / Low Yield | 420% Elongation with High Elastic Recovery | Clean stretch-release removal without tearing |
| Thermal Operating Window | UL 746C Thermal Index | -10°C to +50°C | -25°C to +105°C (Short term excursions to 130°C) | Withstands automotive engine bay ambient cycles |
| Total Outgassing / VOC Content | VDA 277 / GC-MS | High residual acrylates (>150 µg/g) | < 25 µg/g (Ultra-low emission certified) | Cleanroom and automotive cockpit certified |
| Optical Light Transmission | ASTM D1003 | < 92% (Slight hazing over time) | > 99.1% (Non-yellowing acrylic matrix) | Invisible edge lines on glass and optical panels |
Developing the next generation of reversible adhesion technologies: from carbon-nanotube reinforcement to bio-circular crosslinking.
Transitioning 100% of Huayuan extrusion lines to thermal-free ultraviolet photo-polymerization. This eliminates volatile hydrocarbon solvents, achieves zero pinhole porosity, and doubles internal cohesion against continuous shear forces.
Integrating functionalized multi-walled carbon nanotubes (MWCNTs) directly into the viscoelastic gel body. This unlocks simultaneous thermal dissipation (up to 1.8 W/m·K) and electrostatic dissipation (ESD) properties while maintaining stretch-reversibility.
Synthesizing high-purity acrylate monomers derived from non-food agricultural biomass. Targeting 45% bio-based carbon content by Q4 2027 to assist multinational electronics OEMs in meeting Scope 3 carbon reduction mandates.
Engineering thermal-trigger and optical-trigger de-bonding mechanisms. Incorporating sub-micron microcapsules that expand on exposure to specific warm air currents (65°C), reducing adhesive peel strength to near-zero for automated recycling loops.
End-to-end converter support from jumbo master log rolls to rotary die-cut parts, reinforced by international trade legalities.
Recognizing that multinational converters possess differing machinery capabilities, Zhuhai Huayuan supplies:
Importing into strict jurisdictions like the EU, North America, and Japan demands unquestioned product safety credentials. All Huayuan nano tape production batches are certified by independent third-party laboratories (SGS / TUV / CQC):
Our Zhuhai factory in Nanping Science Park and Zhongshan manufacturing center in Tanzhou provide immediate overland proximity to major Pearl River Delta container ports: Shenzhen (Yantian/Shekou), Guangzhou (Nansha), and Hong Kong International Hub.
Huayuan International Technology (Hong Kong) coordinates Letters of Credit, offshore wire transfers, customs clearance, and FOB/CIF shipping lines, drastically cutting overseas lead times.
Critical answers addressing substrate compatibility, shear load safety factors, die-cutting, storage shelf-life, and sample qualification.
Browse our extended product lines for structural bonding, electrical insulation, high-temperature masking, and specialty packaging.
