Direct supply from certified Zhuhai & Zhongshan facilities. Fully slit, coated, and customized to drawing specifications for tier-one electronics manufacturing.
Why conventional polyimide tape induces micro-catastrophic failures in sub-7nm semiconductor packaging and high-frequency power electronics.
Standard Kapton or polyimide tapes generate over 5,000V to 10,000V of static potential during high-speed roll peeling. Huayuan's anti-static formulation incorporates dual-sided conductive nanostructures, restricting peel voltage below 50V to preserve gate dielectrics.
Wave solder baths reach temperatures exceeding 260°C. Our specially polymerized silicone adhesive matrices prevent ionic contamination, solder splash bridging, and corrosive molten flux infiltration while removing completely residue-free.
Modern pouch and prismatic cell manufacturing processes cannot tolerate pinhole arcing or volatile organic outgassing. Our tapes act as flame-retardant barrier layers on current-collector tabs, resisting carbonate electrolytes indefinitely.
Designed under strict cleanroom conditions in our Zhuhai production hub, our anti-static polyimide tape achieves ultra-low CVCM (Collected Volatile Condensable Material) rates, making it suitable for aerospace radar and orbital optics.
How international Tier-1 electronics manufacturers are rebalancing procurement portfolios with verified Chinese precision tape factories.
OEMs in California, Texas, and Ontario demand dual-sided ESD dissipative coatings for MIL-STD-1686C compliance. Huayuan provides direct custom master logs (500mm-1000mm) and pre-cut precision dot masks with full material test certificates.
Automotive tiers across Germany, Poland, and France require IATF-aligned traceability and Halogen-Free certifications. Huayuan's anti-static PI tapes insulate busbars and battery management sensors (BMS) with lifetime thermal durability.
Supplying large-scale contract assembly plants in Vietnam, Malaysia, and Shenzhen with tight 48-hour delivery cycles. Master log rewinding and imported slitting ensure edge burrs remain below 5 microns for automated pick-and-place lines.
Review standard physical parameters certified by SGS laboratory evaluations and ISO 9001 quality audits.
| Performance Characteristic | Standard Polyimide Tape | Huayuan Anti-Static PI Tape (ESD-50) | Test Standard / Method |
|---|---|---|---|
| Base Carrier Material | Pure Polyimide (Kapton Equivalent) Film | Anti-Static Treated Polyimide Film | ASTM D374 |
| Adhesive Matrix | Thermosetting Crosslinked Silicone | ESD Dissipative Crosslinked Silicone | Internal Rheology Test |
| Surface Resistivity (Tape Backing) | Insulative (> 10^12 Ω/sq) | 1.0 × 10^6 – 1.0 × 10^9 Ω/sq | ASTM D257 / IEC 61340 |
| Peeling Triboelectric Static Voltage | > 3,000 V to 8,000 V | < 50 V (Typical: < 30 V) | Modified Mil-B-81705C |
| Operating Heat Resistance | -269°C to 260°C (Peaks at 300°C) | -40°C to 260°C (Peaks at 280°C) | UL 510 Flame Test |
| Dielectric Breakdown Strength | 6.0 kV to 7.5 kV | 5.5 kV to 6.8 kV | ASTM D149 |
| Peel Adhesion (to Stainless Steel) | 5.5 - 6.5 N / 25mm | 5.0 - 6.0 N / 25mm (Residue Free) | PSTC-101 / ASTM D3330 |
Founded in 2007, Huayuan Electronics operates dust-free coating workshops and advanced slitting facilities across Zhuhai and Zhongshan.
Complete quality management system certification running continuously since 2013 across both Guangdong manufacturing bases.
On-site plant inspection, coating thickness verification, and third-party laboratory chemical validation reports available.
Selected high-temperature electrical tape varieties independently verified for flame retardancy in electrical enclosures.
Comprehensive substance verification ensuring total absence of heavy metals, PBDEs, and SVHC chemical hazards.
Anticipating the technological barriers of ultra-high density wafer-level fan-out and wide-bandgap (SiC/GaN) semiconductors.
Synthesizing multi-layer graphene coatings over polyimide backings to pair 10^7 Ω ESD dissipation with over 2.0 W/m·K planar heat conductance.
Developing ultra-low outgassing acrylic-fluoro polymer systems that eliminate siloxane migration in optical sensor packaging and space cameras.
Pushing slitting capabilities down to 12.5µm polyimide substrates with high-precision imported laser-guided rotary slitters for ultra-thin foldables.
Formulating aromatic diamines and dianhydrides from renewable lignin feedstocks to support carbon-neutral electronics supply chains.
Explore our extended series of glass fiber, EMI copper, PET carrier, and specialized adhesive rolls for precision electronic assembly.
Authoritative technical guidance compiled by Huayuan senior materials engineers for quality assurance and purchasing teams.
Standard amber polyimide tape possesses exceptional dielectric properties, but it acts as a severe electrostatic insulator. When unrolled or stripped from a PCB surface, friction causes triboelectric charging that readily spikes above 7,000V. Anti-static polyimide tape undergoes an advanced nanocoating process (either on the carrier backing, within the silicone adhesive matrix, or both) that lowers surface resistivity to 10^6 – 10^9 Ω/sq. This ensures charges dissipate rapidly, keeping peel voltage strictly below 50V and protecting sensitive semiconductor gates and IC components.
Yes. Huayuan has engineered pressure-sensitive adhesive solutions since 2007 and launched dedicated cleanroom die-cutting facilities in 2013. We slit standard log rolls to any custom width from 2.5mm up to 1000mm. Additionally, our automated rotary and flatbed die-cutters supply custom shapes, kiss-cut discs, solder-mask dots, and framed gaskets mounted on easy-peel fluorosilicone release liners according to CAD/Gerber drawings.
Our formulation utilizes a specially synthesized high-purity organosilicone elastomer crosslinked with thermal curing catalysts. This creates a dense three-dimensional polymer network that does not plasticize, soften, or undergo chain scission during exposure to molten solder baths at 260°C (with peak spikes up to 300°C). Consequently, upon removal, the tape releases smoothly with zero adhesive transfer or siloxane residue on gold-plated fingers.
Every commercial production batch is accompanied by a Certificate of Analysis (COA) specifying surface resistivity, peel adhesion value, thickness tolerance, and dielectric breakdown voltage. Furthermore, we maintain up-to-date third-party SGS laboratory test reports certifying complete compliance with EU RoHS directive 2011/65/EU, REACH SVHC standards, and halogen-free thresholds.
Anti-static polyimide tapes should be maintained in their original cleanroom vacuum or moisture-barrier packaging at temperatures between 15°C and 25°C (59°F to 77°F) with a relative humidity of 40% to 60%. When shielded from direct sunlight and high-humidity environments, Huayuan ESD tapes guarantee shelf-life stability and verified ESD performance for at least 12 months from the date of coating.